Another of those jobs thats been hanging around is the fitting, or more precisely the securing of the bow lockers.
The lids have been loosely laid on top which looked fine but was not very safe if you stepped on them going forward as they would slip. They were cut from templates I made then scanned into a CNC router by the same firm that did the rear decks. See here. They also routed a bull nose so now the edges wont dig into the underside of our legs.
I have placed some wooden blocks on the under side that locate against the rim of the locker then to add some security I have set in a latch in each.
Not that anything of great value is kept in them, just I had 2 left over from doing the rear deck after changing the way I secured them down.
0 komentar:
Posting Komentar